Home / Hodga Clean Manufacturer

Hodga Clean Manufacturer

HODGA Clean – AN alkaline degreasing is made by spray, immersion or any manually dipping methods at elevated temperatures. Any contamination of oil and grease or paints etc over the steel will remove when treat in these baths of HODGA CLEAN an Alkaline degreaser powder which made with unique balance formulations of emulsifying additives and surface active agents etc which provides very efficient penetrating , loosening and lifting of various oils, greases & paints etc from the surface of steel or ferrous materials surface.
Generally, alkaline degreasers work at temperatures in the range of 50-65°C. Operating temperatures is very important, at lower temperatures time duration of cleaning reduces. Of course, these values are all depending on the type of grease/oil on the metal surface.
Operating time in immersion alkaline degreasing baths is between 10 – 45 minutes with a chemical concentration of % 5 – 10. Depending on type of the metal and type of grease/oil, treating time can vary. Bath concentration must be controlled periodically and total alkalinity must be maintained in optimum range by addition of chemicals.
Important parameters in alkaline degreasing baths are chemical concentration, treating time, temperature and total alkalinity. Additionally, the hardness of the water effects degreasing. In case of insufficient cleaning even if all parameters are optimal, degreasing additives can be used to improve degreasing effect.
HODGA CLEAN is avail with wide range and custom specifications as per requirement of hot dip galvanizing industry. It is a highly effective powder form product formulated to be used for the treatment of iron, steel contaminated with oil and grease paints etc and providing a thin protective film on the metal surface for temporary corrosion protection.
Imortant parameters in alkaline degreasing baths are chemical concentration, treating time, temperature and total alkalinity. Additionally, hardness of the water effects degreasing. In case of insufficient cleaning even if all parameters are optimal, degreasing additives can be used to improve degreasing effect.
HODGA CLEAN is avail with wide range and custom specifications as per requirement of hot dip galvanizing industry. It is a high effective powder form product formulated to be used for the treatment of iron, steel contaminated with oil and grease paints etc and providing thin protective film on the metal surface for temporary corrosion protection.
Fill in your details below:

PDSMSDS